A journal following the history, design, construction and operation of Bernard Kempinski's O Scale model railroad depicting the U. S. Military Railroad (USMRR) Aquia-Falmouth line in 1863, and other model railroad projects.
©Bernard Kempinski All text and images, except as noted, on this blog are copyrighted by the author and may not be used without permission.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------

November 11, 2012

Road Show and a Movie

Gerry came up for a work session Saturday and we worked on finishing the bench work for the Road Show. First we tried different combinations of valances and supports. Once we decided on a path, another trip to Home Dept was required to pick up the necessary supplies.

We decided to use 1x2's and 1/2x2's for the valance framing. This made it strong enough that one can lift the sections by the valance without damage.  We used tee nuts and 5/16th inch bolts to connect the sections. So there are no clamps needed.

The sections are fairly light, about 5-10 pounds with folding legs and valance. We did not use any exotic materials in the construction. Mostly kiln dried, premium pine lumber, quarter-inch plywood and eighth-inch masonite.   Each section can be lifted by one person, though two people make it easier as they are a bit bulky. We are glad we kept them to four foot lengths.   Gerry and I were discussing the fixation some have on light weight construction and we both believe that it can be taken too far.  Stay away from three quarter inch plywood and you'll be fine with regard to weight.

This shows the integral folding
legs on the slanted section
 The sections have integral folding legs with diagonal braces. Most of the sections have one set of legs, except the big end section and the bridge section. Gerry plans to work on the bridge section at his house, so he wanted it to be able to stand on its own.

To assemble the road show layout, the only tool needed is a 1/2 inch wrench. If you are in a hurry, a 1/2 inch socket in a power drill speeds things up. It should not take us more than 15 to 30 minutes to set up.

 On Sunday I finished adding the valance and fascia. It is now ready for the next steps -  lighting and the foam terrain.

On a separate subject, I received a notice from Google that my photo quota has reached its limit. So you may find some older photos missing as I go back and purge some images.




No comments:

Post a Comment